Efficient injection and distribution of nanoparticles in porous media are considered a formidable technical hurdle for injection-based in situ remediation. One approach to enhance the mobility of nano-particles in an aquifer is to use surface modifiers. In this study, nanoscale magnesia (NMgOs), an innovative and effective remedial material for cadmium (Cd) removal from groundwater, was modified with the negatively charged and eco-friendly humic acid to enhance its mobility in aquifers. A two- dimensional reactor (605010 cm), with 2 injection wells and 30 monitoring wells was designed, constructed, and sand-packed in the laboratory to simulate a saturated aquifer. The simulated aquifer was pre-contaminated with Cd to simulate a plume in groundwater. The distribution of injected un- modified NMgOs and humic acid-modified NMgOs slurry were evaluated in the reactor. The radius of influence (ROI) of humic acid-modified NMgOs was estimated to be approximately 5 cm based on visual observation, while no ROI was apparent for the unmodified NMgOs because of their aggregation at the bottom of the injection wells. The concentrations of Cd and magnesium (Mg) were monitored in all 30 monitoring wells at different time intervals to evaluate the effectiveness of Cd removal. The break- through curve analysis revealed that humic acid enhances the transport of NMgOs in the saturated porous media. Furthermore, the results of scanning electron microscopy-energy dispersive x-ray (SEM-EDX) characterization of silica sand before and after injection of NMgOs verified the presence of 5.78% of Mg from humic acid-modified NMgOs and 0.19% from unmodified NMgOs at 35 cm downgradient of the injection wells, which are consistent with the conclusion drawn from the breakthrough curves.